 |
|
Balance Shaft Eliminator Kit (Chrysler/Mitsubishi 1.8/2.0/2.4L) - 6642
For Chrysler/Mitsubishi 1.8L,2.0L,2.4L. G62B, G63B, 4G63B, G64B, G64B, 4G64B Belt Drive Applications. Kit Includes: Upper and Lower Bushings, Oil Plug Pin Bushing, and Oil Galley Block-Off Plug
|
 |
|
Balance Shaft Eliminator Std. Kit (Chrysler/Mitsubishi 2.6L) - 6640
For Chrysler/Mitsubishi 2.6L Standard Kit. Kit Includes: Balance Shaft Replacement Pin, Replacement Bushing, and Oil Pump Drive Chain.
|
 |
|
Balance Shaft Eliminator Master Kit (Chrysler/Mitsubishi 2.6L) - 6641
For Chrysler/Mitsubishi 2.6L Master Kit. Kit Includes: Balance Shaft Replacement Pin, Replacement Bushing, Oil Pump Drive Chain, Chain Guide, Crank Guide, Crank Gear, and Oil Pump Gear.
|
 |
|
Ford Fuel Pump Eccentric Kit (SB & BB 255/302/351M/351W/400M/429/460) - 6557
Fits Ford SB & BB 255, 302, 351M, 351W, 400M, 429, and 460. Kit Includes: Inner & Outer Eccentric, Bolt & Washer. Replacement parts sold individually. Replaces the following OEM numbers: D5AZ-6287-B & DOAZ-6287-A.
|
 |
|
Jet Valve Eliminator Kit (Chrysler/Mitsubishi 2.6L - Short) - 6644
For Early Model (short) Chrysler/Mitsubishi 2.6L. Replaces jet valves in cylinder heads for use in non jet valve applications. Fits many other applications where OEM Jet Valve #MD009440 is used.
|
 |
|
Jet Valve Eliminator Kit (Chrysler/Mitsubishi 2.6L - Long) - 6645
For Late Model (long) Chrysler/Mitsubishi 2.6L. Replaces jet valves in cylinder heads for use in non jet valve applications. Fits many other applications where OEM Jet Valve #MD009440 is used.
|
 |
|
Ford Lash Cap (Ford 302-351W 1969-77) - 6510
Fits Ford 302-351W, 1969-77.
|
 |
|
Ford Smog Plugs (V8 255/302/351C/351M/351W/400) - 6556
Fits Ford V8 255, 302, 351C, 351M, 351W, 400. (5/8-11 OD x 7/16-14 ID)
|
 |
|
Chevy Smog Plugs (Chevy 250/292 & Pontiac 151) - 6556CS
Fits Chevy 250, 292, & Pontiac 151. (3/4-18)
|
 |
|
Press-In Rocker Arm Studs (5/16"-24 x 2-3/4" (on size)) - 6461
7/16"-14 x 2", Fits: Chevy 366, 396, 400; 4 bolt 402, 427, 454.
|
