 |
Seal-Lock Mag II Crack Detection System - 19003
The Seal-Lock Mag II Crack Detection System features new rare earth magnetic alloys. Portable, these permanent magnets weigh less than 2 lbs.! Enclosed in nylon covers and guaranteed forever to never lose their power. Kit includes set of Mag II probes, 1 lb. of crack detection powder, and a plastic storage case.
$375.00
|
 |
Seal-Lock Jig (3/16", For Use with Seal-Locks) - 16113
3/16" Seal-Lock Jig. Using the Seal-Lock Jig alongside Seal-Locks ([[3-Lobe]:product=14112] or [[5-Lobe]:product=14117]), a [[Drill Bit]:product=17111T], and an air drill, paterns of tangent holes are drilled straddling the crack. Seal-Locks are inserted into the patterns. Once in place, they act like giant staples, keeping the crack forever from reopening or propagating further. The balance of the crack between the Seal-Locks is sealed using Sealace Taper Plugs, capable of holding pressures ...
$198.00
|
 |
Seal-Locks (25 Pk., 3/16" 3-lobe for up to 1/4" casting) - 14112
3/16" 3-lobe for up to 1/4" casting, 25 Pk. Using the [[Seal-Lock Jig]:product=16113], a [[Drill Bit]:product=17111T], and an air drill, paterns of tangent holes are drilled straddling the crack. Seal-Locks are inserted into the patterns. Once in place, they act like giant staples, keeping the crack forever from reopening or propagating further. The balance of the crack between the Seal-Locks is sealed using Sealace Taper Plugs, capable of holding pressures in excess of 6000 PSI. Peen with ai...
$49.75
|
 |
Seal-Locks (25 Pk., 3/16" 5-lobe for up to 1/4" casting) - 14117
3/16" 5-lobe for up to 1/4" casting, 25 Pk. Using the [[Seal-Lock Jig]:product=16113], a [[Drill Bit]:product=17111T], and an air drill, paterns of tangent holes are drilled straddling the crack. Seal-Locks are inserted into the patterns. Once in place, they act like giant staples, keeping the crack forever from reopening or propagating further. The balance of the crack between the Seal-Locks is sealed using Sealace Taper Plugs, capable of holding pressures in excess of 6000 PSI. Peen with ai...
$74.75
|
 |
Seal-Lock Air Hammer - 18600
The perfect peening hammer for repairing cracked castings! With features not found in any other air hammer.Features:*Uses Less Air - Only 3 C.F.M. at 90 P.S.I.*Light Weight (20 oz.) - Reduces operator fatigue*Rugged - Virtually maintenance-free cast aluminum handle*Handy Slip Chuck - Quick and easy tip changes*Exclusive Patented Metering Trigger - Perfectly controlled from 0 - 13,000 Blows Per Minute*Less Than 6" Overall Length - Lets you work in tight areasUse with the following Se...
$372.00
|
 |
Seal-Lock Peening Tip (3-1/2" Pointed End) - 18602
3-1/2" Pointed End Peening Tip for [[Seal-Lock Air Hammer]:product=18600]. Peening Tips snap in and out of chuck easily and are safely locked in. The Air Hammer has no dangerous, cumbersome spring retainers.
$29.00
|
 |
Seal-Lock Peening Tip (4" Flat Chisel) - 18605
4" Flat Chisel Peening Tip for [[Seal-Lock Air Hammer]:product=18600]. Peening Tips snap in and out of chuck easily and are safely locked in. The Air Hammer has no dangerous, cumbersome spring retainers.
$32.00
|
 |
Seal-Lock Peening Tip (3-1/2" Round End) - 18601
3-1/2" Round End Peening Tip for [[Seal-Lock Air Hammer]:product=18600]. Peening Tips snap in and out of chuck easily and are safely locked in. The Air Hammer has no dangerous, cumbersome spring retainers.
$29.00
|
 |
Seal-Lock Peening Tip (7" Pointed End) - 18604
7" Pointed End Peening Tip for [[Seal-Lock Air Hammer]:product=18600]. Peening Tips snap in and out of chuck easily and are safely locked in. The Air Hammer has no dangerous, cumbersome spring retainers.
$32.00
|
 |
Seal-Lock Peening Tip (4" Offset Flat Chisel) - 18606
4" Offset Flat Chisel Peening Tip for [[Seal-Lock Air Hammer]:product=18600]. Peening Tips snap in and out of chuck easily and are safely locked in. The Air Hammer has no dangerous, cumbersome spring retainers.
$32.00
|
 |
Seal-Lock Peening Tip (6-1/2" Blank) - 18607
6-1/2" Blank End Peening Tip for [[Seal-Lock Air Hammer]:product=18600]. Peening Tips snap in and out of chuck easily and are safely locked in. The Air Hammer has no dangerous, cumbersome spring retainers.
$32.00
|
 |
Seal-Lock Peening Tip (8-1/2" Curved End) - 18608
8-1/2" Curved End Peening Tip for [[Seal-Lock Air Hammer]:product=18600]. Peening Tips snap in and out of chuck easily and are safely locked in. The Air Hammer has no dangerous, cumbersome spring retainers.
$58.00
|
